Spray Durabak:

Use a shutz gun and 1/2" clear tubing which can be purchased at Lowes or Home Depot. Drill a 1/2" hole in the top of the can for the tubing and punch a vent hole for can to breath. Slide a 24"- 30" piece of tubing onto bottom of the pickup tube of the gun and cut the other end of tubing at an angle and stick it into the bottom of the can. The angle is cut so the tube does not get siphon stuck to the bottom of the can on the inside. The gun needs 90 PSI or above in order to siphon material from the can. Adjust as needed. Spray at about 12" adjusting as needed.

««Prevoius Page

Factoid:
The average workplace accident results in 5 days of lost work!!!

The Durabak Company
Phone: 303-690-7190